Technical Specifications - Beurer BC 81 Instruction Manual

pliance could void the user's authority to operate the
equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide rea sonable protection against harmful
interference in a resi dential installation. This equip-
ment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance
with the instructions, may cause harm ful interference
to radio communications. However, there is no guar-
antee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful
interfer ence to radio or television reception, which
can be deter mined by turning the equipment off and
on, the user is en couraged to try to correct the inter-
ference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and re ceiver.
• Connect the equipment into an outlet on a cir-
cuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
techni cian for help.

11. Technical Specifications

Model no. BC 81
Type BC 80
Measurement Oscillometric, non-invasive blood
method pressure measurement on the
wrist
Measurement Cuff pressure 0-300 mmHg,
range Systolic 50-250 mmHg,
Diastolic 30-200 mmHg,
Pulse 40-180 beats/minute
Display accu- Systolic ± 3 mmHg,
racy Diastolic ± 3 mmHg,
Pulse ± 5 % of the value shown
Measurement Max. permissible standard devi-
accuracy ation according to clinical testing:
Systolic 8 mmHg /
Diastolic 8 mmHg
Memory 2 x 60 memory spaces
Dimensions L 3.8" x W 2.7" x H 0.9"
(L 9.7 cm x W 6.8 cm x H 2.2 cm)
Weight Approximately 3.8 oz. (108 g)
(without batteries)
28