Troubleshooting
Information codes
If the dishwasher fails to operate, you may see an information code on the display. Check
the table below and try the suggestions.
Code
Leakage check
• Close the water supply valve. Go to your home's circuit breaker panel,
LC
Water supply check
• Check if the water supply valve is closed, if the water supply is
4C
Drain check
• Close the water supply valve. Check if the drain hose is clogged or
5C
High temperature heating check
• Functional check. With the dishwasher empty, add detergent, and then
HC
Pump operation check
3C
• Functional check. Turn off the dishwasher and restart. If the issue
If any information code keeps appearing on the screen, contact a local Samsung service
centre.
44
English
DW9000M_DD68-00191D-01_EN.indd 44
and set the dishwasher's circuit breaker switch to off. Then, contact the
installer to repair. If the issue continues, contact a local Samsung service
centre.
suspended, or if the water inlet valve or line is frozen or clogged by
foreign particles. If the issue continues, contact a local Samsung service
centre.
folded. Check if the drain hole inside the pump is clogged. If the issue
continues, contact a local Samsung service centre.
run a cycle. If the issue continues, go to your home's circuit breaker
panel, and set the dishwasher's circuit breaker switch to off. Then,
contact a Samsung service centre.
continues, contact a Samsung service centre.
Action
2/20/2018 12:26:17 PM