Information Codes - Samsung DW80N3030US/AA-00 User Manual

troubleshooting

INFORMATION CODES

The Control Panel displays information codes to help you understand what is occurring with your
dishwasher.
If your dishwasher has a problem, the CODE SYMBOL lights blink as shown below.
60
60
60
60
60
60
60
60
For any codes not listed above, call 1-800-SAMSUNG (726-7864)
If an overflow occurs, turn off the main water supply before calling
for service.
If there is water in the base pan because of an overfill or small leak,
WARNING
the water should be removed before restarting the dishwasher.
Th e water tap isn't opened.
Th e pressure switch is broken.
No water
T he wash pump sn't work
There is a problem with
Th e high water switch
The high water switch was on continuously for 120 seconds.
High-water level
There is a problem with the Main PBA.
The heater was on continuously for 60 minutes, but the water
did not heat up to the required temperature.
Not reaching required
temperature
Th e eater is broken.
T he emperature detected by the
There is a problem with the Main PBA.
T he leakage switch is broken.
The leakage switch was activated for 2 seconds.
Water leakage
There is a problem with the Main PBA.
The thermistor suffered an open-circuit failure.
Thermistor open-circuit
failure
There is a problem with the Main PBA.
The thermistor suffered a short circuit failure.
Thermistor short-circuit
failure
There is a problem with the Main PBA.
A touch key was operated abnormally or operated abnormally.
Example: A key was pressed for more than 30 seconds.
Abnormal operation of
touch key-press
There is a problem with the Sub PBA.
A touch key was operated abnormally or operated abnormally.
Example: A key was pressed for more than 30 seconds
Abnormal signal
There is a problem with the Main PBA.
There is a problem with the Sub PBA.
English - 26
Possible
i ing .
the Main PBA .
was activated 5
h
t ther
times for 5 s econds.
mistor is wrong.