Lubrication - Oliver 4470 Owner's Manual

Lubrication

•
Add a few drops of medium weight oil to the
six oil cups (A, Figure 25) weekly or every
eight hours of use (which ever comes first).
•
Lubricate the two table elevation screws (B,
Figure 26) as needed. Raise the table and
remove the two screws holding the top of
the accordion cover (C, Figure 26) in place.
Pull the cover down and lightly grease the
elevating screws, see Figure 26.
•
Use an oiled cloth to wipe the ways (D,
Figure 26) weekly.
•
Lubricate the chain system with an oiled
cloth as needed.
•
The gear box oil should be changed once a
year. Remove the drain plug (E, Figure 27)
to drain the oil. Refill the gear box with 60-
90 weight gear oil through the fill hole (F,
Figure 27) until the sight glass reads full.
The sight glass (G, Figure 27) should be
checked periodically and oil added as
necessary.
18