Table of Contents
Advertisement
HSS-730/830 & UFD505/515 SERVICE MANUAL
3.4.3. Software Download with Serial Link Cable from other STB
Procedure to download the software
First, connect the serial link cable between the master STB and slave STB and make sure that the STB is in the
standby or power off mode.
①
After the master STB turn on, push select key and volume down key simultaneously for downloading
main Program
If master STB is ready, FND display ' - - - - ' in Front panel.
FND is not display ' - - - -', try again
②
The slave STB turn on and then wait
③
The master, slave STB will display 'SUCC' all when the download is complete.
④
After the master STB turn on, push select key and volume up key simultaneously for downloading
channel data.
⑤
The slave STB turn on and then wait
⑥
The master, slave STB will display 'SUCC' all when the download is complete
HDT DVB SATELLITE STB
Page
13
Advertisement
Table of Contents
