Table of Contents
Advertisement
SMU01A
User Manual
The SMU01A provides an LCD screen and a web UI is also available when the SMU01A is
connected to a personal computer (PC). For details about the LCD screen and web UI, see
chapter 3 "LCD Description" and chapter 4 "Web UI Description." An EMS UI is available to
customers when the SMU01A is connected to an EMS. For details about the EMS UI, see
related EMS operation guides.
5.1 Setting Communications Parameters
Set SMU01A communications parameters based on actual requirements.
The SMU01A is connected to Huawei communications equipment over an RS485/RS232 port.
You can set communications addresses of Huawei communications equipment on the LCD or
over the web UI.
If the SMU01A is connected to an Ethernet over a COM port, you need to set the IP address,
subnet mask, and gateway on the LCD based on those assigned by customers and then
perform other operations.
On the LCD, you can choose Settings > Quick Setting to change the IP address, subnet mask,
and gateway of the SMU01A.
Communicating with Huawei Communications Equipment
Set the communications addresses and baud rates of Huawei communications equipment on
the LCD or over the web UI. The default communications address is 0 and the default baud
rate is 9,600 bit/s.
On the LCD, choose Settings > Communication Parameter to set the host communications
address and host communications baud rate.
For details about how to set communications parameters over the web UI, see Figure 4-8.
Accessing the Web Page
To access the web page locally or remotely through a PC, enter the IP address of the SMU01A
in the browser. For details, see 4.2 "Preparations for Login."
Issue 06 (2015-10-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
5
Operation Guide
5 Operation Guide
34
Hide quick links:
Advertisement
Table of Contents
