Table of Contents
Advertisement
By connecting this unit with a computer using a USB cable,
you can power the unit with USB bus power, and use the unit
as an SD card reader and as a USB audio interface.
Computer
CAUTION
The unit should be connected directly with the computer
instead of via a USB hub.
Powering the unit with USB bus power
When the unit is off
1.
Connect the computer and the unit with a USB cable,
and turn the unit on to open the USB screen.
2.
Use the + or – button to select BUS POWER and press the
ENTER/MARK button to select power from the USB port
and reopen the Home Screen.
When the unit is on
When operating on batteries, if you connect the computer
and the unit with a USB cable, the unit will be powered from
its USB port (USB bus power is used first).
NOTE
The same thing will also happen when using an AC
adapter.
Micro-B USB plug
USB
12 – USB Connections
Using as an SD card reader
By connecting this unit with a computer using a USB cable,
you can use it as an SD card reader.
You can transfer recorded audio files to a computer and also
transfer audio files from a computer to the unit.
When the unit is off
1.
Connect the computer and the unit with a USB cable,
and turn the unit on to open the USB screen.
2.
Use the + or − button to select SD CARD READER and
press the ENTER/MARK button.
The SD CARD READER screen will open.
When the unit is on
When operating on batteries, connect the unit and the
computer with a USB cable
1.
Press the MENU button to open the MENU screen.
2.
Use the + or − button to select USB, and press the
ENTER/MARK button to open the USB screen.
3.
Use the + or − button to select SD CARD READER and
press the ENTER/MARK button.
The SD CARD READER screen will open.
65
TASCAM DR-40X
Advertisement
Table of Contents
