Global FREEFIT Installation Manual & Operating Instructions page 5

GLOBAL Contract
3-Column 90° Telescopic Crossbars
Attach the crossbars on the long side of the housings. Tighten
screws firmly. IMPORTANT: Do not use the two middle holes of the
crossbars. Do not insert any object in the two middle holes as this
can damage electronic components.
Loosen the round headed screws on the cross-bars and adjust the
frame to desired width.
Fasten the screws on the crossbars.
3 regular telescopic crossbars and 1 special telescopic crossbar
with an angled C-channel are used.
3-Column 90° Fixed Crossbars
3-Column 90º Table, Fixed Crossbars 3 regular fixed crossbars
together with 1 regular fixed crossbar 6" shorter than the other
three are used.
The assembly procedure is the same as for a 2-column table with
the exception that the angled C-channel mounts to the middle house
with one extra-long screw 1-3/8".
Page 6 • globalcontract.com
globalfurnituregroup.com
FREEFIT INSTALLATION GUIDE
3 Regular telescopic crossbars.
1 Special Telescopic crossbar.
No additional assembly kit.
3 Regular fixed crossbar.
Regular fixed crossbar 6" shorter
than the other three crossbars.
Assembly Kit PR25 90º Angle
• August 2014
Screw socket CSK
UNC 5/16-18x1-
3/8" Zn
Screw socket CSK
UNC 5/16-18x1-
3/8" Zn
5