Setting Up Your Zotac Vr - Zotac VR GO 2.0 User Manual

ZOTAC VR GO 2.0
Setting up your ZOTAC VR GO 2.0
You need to connect peripherals before using your ZOTAC VR GO 2.0.
8
1. Connecting to USB 3.0 devices
Connect USB 3.0 devices such as external hard drives, SSDs and flash drives to the USB 3.0
port on the system rear panel.
2. Connecting to a network device
Connect one end of a network cable to the LAN port on the system rear panel and the other
End to a hub or switch.
3. Connecting to DisplayPort display
Connect the DisplayPort connector to the DP ports of the monitor or display.
24
3
1
2
8
4
1
5 6
3 4
1 2
7
7
5 6