Using Your Zotac Vr; Configuring A Wireless Connection; Configuring Audio Output - Zotac VR GO 2.0 User Manual

Using your ZOTAC VR GO 2.0

Configuring a wireless connection

Please follow the instructions below to connect to a wireless network:
1. Double-click the wireless network icon (pic) in the notification area.
2. Select the wireless network you want to connect to from the list and
click Connect.
3. After connection is established, you will see "Connected."
Note 1: For security concerns, Do NOT connect to an unsecured network,
otherwise, the transmitted information without encryption might be visible to
others.
Note 2: Enter the network security key if necessary.

Configuring audio output

Follow the steps below to enable audio output when connecting
the ZOTAC VR GO 2.0 to a TV or receiver via DP/HDMI adapter.
1. Access the Sound settings via the system Control Panel.
2. Under Playback devices, click the display device that
corresponds with your audio compatible display.
3. Click the "Set Default" button in the lower right hand corner.
4. Click "OK" to exit the setup.
ZOTAC VR GO 2.0
31