MTU 12V4000C*5 series Operating Instructions Manual page 206

8.13.3 Engine oil – Change
Preconditions
☑ Engine is stopped and starting disabled.
☑ Engine is at operating temperature.
☑ MTU Fluids and Lubricants Specifications (A001061/..) are available.
Special tools, Material, Spare parts
Designation / Use
Torque wrench, 10–60 Nm
Torque wrench, 60–320 Nm
Torque wrench, 300–800 Nm
Ratchet bit
Ratchet bit
Engine oil
Sealing ring
WARNING
Oil is hot.
Oil can contain residue/substances which are harmful to health.
Risk of injury and poisoning!
• Allow the product to cool to below 50 °C before beginning work.
• Wear protective clothing, protective gloves and goggles/safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
Oil change without semirotary hand pump: Draining engine oil at drain
plug(s) on oil pan
1. Provide a suitable container in which to collect the engine oil.
2. Remove drain plugs (1) on driving and free
end and drain engine oil.
3. Fit drain plugs (1) on driving and free end and
with new sealing ring.
204 | Lube Oil System, Lube Oil Circuit | MS15041/03E 2018-08
Part No.
F30452769
F30452768
F30047798
F30027341
F30450902
(→ Spare Parts Catalog)
Qty.
1
1
1
1
1