Decal Installation Instructions - Bunn G Series Installation & Operating Manual

DECAL INSTALLATION INSTRUCTIONS (Continued)
A "Grinding Instructions"
decal is supplied.
This decal is required
when installed in a
protected location
such as under a
canopy, marquee,
shelter or similar
structure.
Here is the location
for this decal:
REPLACING THE STANDARD CHUTE WITH THE OPTIONAL TRIFECTA
The standard chute can be switched out with the optional trifecta kit to be used with the trifecta
single serve brewer. This kit has a holder for the trifecta cup (shown below).
Remove four screws from
1
below the number dial.
Replace the four screws
4
from below the number dial.
A "Flavored Coffees
ONLY" decal is supplied
for use if preferred.
Here is the location
suggested for this decal:
Remove the chute.
2
11
KIT
®
Replace with the trifecta
3
chute.
The chute will now hold
the cup compatible with
the trifecta single cup,
®
Air Infusion brewer.
®
112018