Mounting Position, Installation Clearances; Standard Mounting Position; Other Mounting Positions - Siemens LOGO!Power 6EP1311-1SH13 Operating Instructions Manual

Mounting position, installation clearances

3.1

Standard mounting position

The device is designed for installation on a standard mounting rail EN 60715 35x7.5/15. The
device must be mounted vertically to ensure proper cooling, and with the input terminals and
output terminals at the top.
A clearance of at least 20 mm should be maintained above and below the device. No space
is required at the side.
3.2

Other mounting positions

For mounting positions that deviate from the standard mounting position, derating factors
(reduction of the output power or the permissible ambient temperature) must be observed in
accordance with the following diagrams.
Figure 3-1
Figure 3-2
LOGO!Power
Operating Instructions, 02.2011, C98130-A7560-A999-1-7619
Mounting position (1)
Mounting position (2)
3
15