Set Relay 2; Set Sensor Connection Type And Range - Honeywell Sensepoint RFD Technical Manual

SENSEPOINT RFD OPERATING MANUAL
10.4 P-05 Set relay 2
1. Select the P-05 set relay 2 menu.
2. The display shows either:
3. Use the Up and Down buttons on the Handheld Remote Interface to select
the required setting.
4. Press OK to confirm the change.
Note: The change becomes active when the detector returns to normal gas
monitoring.
10.5 P-06 Set sensor connection type and range
1. Select the P-06 set sensor connection type and range menu.
2. The display shows the sensor type code (S-01 to S-04)
3. Use the Up and Down bottoms to select the required code (from the table
below) for the sensor being used.
Sensor Sensor Part
Range Number
2106B2310
0-20%LEL
2106B2312
00705-A-1735
2106B2310
2106B2312
00705-A-1735
0-100%LEL
2106B1200
2106B1204
00705-A-1733
4. Press OK to confirm the selection.
5. The display then shows the current full scale sensor range.
6. Use the Up and Down buttons to select the required code (0-20% LEL or
0-100% LEL).
7. Press OK to confirm the selection.
Caution: If the wrong sensor code is selected for the type of sensor being
used, the user will not be able to successfully span calibrate the sensor or a
r 2-d (relay 2 normally de-energized)
r 2-e (relay 2 normally energized)
Sensepoint High Temperature Flammable Sensor- 0-20% or
0-100% LEL- Stainless Steel- M20- ATEX
Sensepoint High Temperature Flammable Sensor-
0-20% LEL or 0-100% LEL- Stainless Steel- ¾ NPT- ATEX
705 High Temperature Flammable Sensor- 0-20% LEL or 0-100%
LEL- Aluminum- ¾ NPT- UL
Sensepoint High Temperature Flammable Sensor- 0-20 % or
0-100% LEL- Stainless Steel- M20- ATEX
Sensepoint High Temperature Flammable Sensor-
0-20% LEL or 0-100% LEL- Stainless Steel- ¾ NPT- ATEX
705 High Temperature Flammable Sensor- 0-20% LEL or 0-100%
LEL- Aluminum- ¾ NPT- UL
Sensepoint Flammable Sensor- 0-100% LEL- Stainless Steel- M20-
ATEX
Sensepoint Flammable Sensor- 0-100% LEL- Stainless Steel- ¾ NPT-
ATEX
705 Flammable Sensor – 0-100% LEL- Aluminum – ¾ NPT- UL
sensor error fault code will be displayed.
26
RFDMAN MAN0843 Issue 3
Description
Sensor
Code
S-03
S-03
S-02
S-03
S-03
S-02
S-04
S-04
S-01