Table of Contents
Advertisement
SENSEPOINT RFD OPERATING MANUAL
To mount the Sensepoint RFD transmitter use the following procedure:
1. Loosen the lock-screw on the mounting bracket collar.
2. Pass the sensor entry neck of the transmitter through the collar as far as it
will go.
3. Securely tighten the mounting bracket collar lock- screw.
4. Mount the bracket to a pole or wall using appropriate fixings.
5.3 Mounting the sensor
The flammable gas sensors that can be used with the Sensepoint RFD transmitter
can be mounted directly to the bottom entry or remotely to a suitable junction box.
Directly mounted sensor
Diagram 5: Outline dimensions
10
RFDMAN MAN0843 Issue 3
Diagram 6: Sensor mounting options
Remotely mounted sensor
Advertisement
Table of Contents
