To Insert Leg Frames; To Attach Base Frame - Childcare Chloe Manual

ASSEMBLY / OPERATING INSTRUCTIONS

To insert Leg Frames...

1a.
1
1b.
PLEASE NOTE: The assembly of this bassinet may require two people.
2a.
2
2b.

To attach Base Frame...

1a.
1
1b.
2a.
2
PLEASE NOTE: Do not tighten bolts completely
8
Insert one leg marked 'A' into one of the joint on the top
frame marked 'A'.
Push the pop pin in whilst inserting leg into joint,
ensuring the pop pin clicks into position.
Repeat for remaining three legs, ensuring the correct
leg is placed in the correct position according to the
corresponding letters.
Ensure the plastic supports are facing inward, as shown
in image.
Turn the frame onto it's feet and place the mattress
board into position.
Ensure the battery box is facing downwards.
Secure the mattress support board to the frame using
the 8mm screw with a Phillips head screwdriver (not
supplied).
face inward