To Attach Mobile Arm - Childcare Chloe Manual

ASSEMBLY / OPERATING INSTRUCTIONS

To attach Mobile Arm...

1a.
1
1b.
1c.
2a.
2
3a.
3
PLEASE NOTE! Ensure the mobile wire with connector is on the inside of the
frame.
4a.
4
4b.
5a.
5
PLEASE NOTE! Always ensure the mobile is securely attached to the bassinet
prior to each use.
12
Remove the two pre-assembled 28mm screws from
the mobile arm.
Open the slot in the bassinet liner and position the
mobile arm on the frame.
Ensure there is no foam restricting the frame.
Position the mobile arm on the frame ensuring the
holes on the mobile arm line up with the holes in the
frame.
Re-insert two 5mm (28mm diameter) screws into the
holes and tighten with a Phillips head screwdriver.
Thread the battery wire with connector under the
frame and up through the bottom two fabric loops.
Push the mobile wire connector into the battery wire
connector.
Fit the mobile to the mobile arm by pushing it up firmly.