■
Installing/ Removing the Propellers
GHOSTDRONE 2.0 LTE uses 2-bladed 8.5-inch self-tightening propellers. Propeller nuts
have two colors, silver and black. Each indicates different rotating directions, and should be
installed to the motor shaft with the same color.
Legends
Lock: Tighten the propeller in this direction.
Unlock: Remove the propeller in this direction.
Installation
1. Put the drone upside down.
2. Match the silver nut propellers with the L motors (with silver motor shaft), and tighten the propel-
lers according to the LOCK instructions.
3. Attach the black nut propellers to the R motors in the same way.
3. Assembly
06