Table of Contents
Advertisement
After turning on the battery you can enter the battery status interface by clicking the ON button,
to return to the main interface click the ON button again.
Number of Fully Charge
and Discharge Cycle
Battery Lifespan Percentage
Powering Off
Press the power button shortly, then press and hold again until the '!' of 'SEE YOU !' message
disappears on the screen.
Battery Removal & Installation
Remove Battery
Turn off the battery first. Hold the battery handles to remove it from the battery compartment.
Install Battery
Hold the battery handles and push the battery into the battery compartment until you hear a
click.
Note: DO NOT remove or install the battery into the copter when it is powered on, otherwise the
battery will be damaged.
Electronic Current
Secondary Interface
16.66
98%
4516
mAh
Cell1:
4.162V
Seperate
Cell2:
4.167V
Cell3:
4.161V
Chamber's Voltage
Cell4:
4.164V
Current:
-0.021A
Cycle:
6
Health:
99%
SEE YOU!
09
Advertisement
Table of Contents
