Permobil M300 Corpus HD User Manual page 77

M300 Corpus HD
Saving position to memory
1. Set the seat's electrical functions to the desired mode.
2. If not activated, activate the seat/ memory function by pressing
the "Mode" button one or more times until a seat icon appears
in the control panel display.
3. Move the joystick to the left or right to select a memory location
(M1, M2 or M3). A seat icon and memory symbol "M" for the
memory location selected are shown in the control panel display
- see fig. 41.
4. Move the joystick backwards to activate the "save" function. An
arrow will appear next to the memory symbol "M" - see fig. 42.
5. Save the current position by moving the joystick forwards and
holding it in that position until the arrow next to the memory
symbol "M" disappears.
Getting to know your wheelchair
PROFILE
MODE
Figure 41. Memory function activated
M
1
77