Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn"
"
Pqvg<"
The promoted Found New Hardware Wizard screen will pop up when the adapter is installed
correctly. Click Ecpegn.
404"Uqhvyctg"Kpuvcnncvkqp"
40403"Hqt"Ykpfqyu"ZR"
The adapter's Setup Wizard will guide you through the installation procedures for
Windows 7, Windows Vista, and Windows XP. The procedures in different
systems are quite similar, therefore here takes the procedures in Windows XP for
example.
1. Insert the Resource CD into your CD-ROM drive. To continue, double-click
O{" Eqorwvgt, and then double-click the EF1FXF drive where the
installation CD was placed. Open P;22REG folder, and double-click"
Ugvwr0gzg. Then you will see Figure 0-1.
2. Soon,
Figure 0-2 will display after a moment. Click Pgzv to continue.
X
Figure 0-1
-6-