Fwcn"Dcpf"Yktgnguu"REK/G"Cfcrvgt" " " " " " " " " " " " " " " " " /"RNWD-N9003PCE/" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Wugt‚u"Ocpwcn"
Crrgpfkz"D<"Eqphkiwtkpi"vjg"RE"
In this section, we'll introduce how to install and configure the TCP/IP correctly in
Windows XP. First make sure your Ethernet Adapter is working, refer to the
adapter's manual if necessary.
30" Eqphkiwtg"VER1KR"eqorqpgpv"
1) On the Windows taskbar, click the Uvctv button, and then click Eqpvtqn"
Rcpgn.
2) Click the Pgvyqtm"cpf"Kpvgtpgv"Eqppgevkqpu icon, and then click on the
Pgvyqtm"Eqppgevkqpu tab in the appearing window.
3) Right click the icon that showed below, select Properties on the prompt
page.
4) In the prompt page that showed below, double click on the Kpvgtpgv"
Rtqvqeqn"*VER1KR+.
Hkiwtg"D/3"
-47-