Install Paper Basket
1
Attach the rods to the paper basket as shown.
2
Insert the end of the rods into the front legs of the stand until they snap
into place.
3
Push the basket canvas through to the back of the printer. Make sure the
canvas is underneath the support brace.
4
Attach the basket loops to the hooks on the stand as shown.
5
Attach the basket loops to the hooks on the front legs of the stand.
6
Close the paper basket by pushing it towards the printer stand.
Install Ink Cartridges
Note:
•
The printer is designed for use with Epson
cartridges or ink.
•
The cartridges included with the printer are designed for printer setup and not for
resale. After some ink is used for initializing, the rest is available for printing.
1
Connect the power cord to the printer and plug the other end into an
outlet.
2
Remove the protective film from the touchscreen.
Note:
The touchscreen will not operate if you do not remove the
protective film.
3
ON button on the control panel to turn on the printer.
Press the
Raise the control panel if necessary.
4
Select your language on the LCD screen.
5
Select the date and time.
6
Follow the prompts to begin ink initialization.
Note:
Select See Guide to view additional instructions.
7
Open the ink cartridge cover.
cartridges only, not third-party
®