Connecting Ac Adaptor(Charging) - Fujitsu FTP-628WSL210 Series User Manual

2 Preparation to print

2.5 Connecting AC Adaptor(Charging)

The battery is charged by the charger capability with
built-in this printer.
Caution
Please stop charging at once if an abnormal charge is generated.
1. Please connect the AC cable with
the AC adaptor, and connect the
AC plug with the outlet.
2. Please open the connector cover
for the AC adaptor, and connect
the DC output terminal of the AC
adaptor with the connector for
the AC adaptor.
3. When the charge starts, the LED becomes lighting red,
and when the battery becomes a full charge, the LED is
turned off. Please refer to chapter 4.3 for the LED display
of charging status.
4. Please close the battery cover by
hanging the hook of cover, and
pushing the center of cover.
Important
When the printer power supply is turned on, it is not able to
charge.
20
AC cable AC adaptor
Connector for
AC adaptor
[Side view]
②
①
Cover