HP 83491A User Manual page 53

adapters.
Although foam swabs can leave filmy deposits, these deposits are very thin, and
the risk of other contamination buildup on the inside of adapters greatly out-
weighs the risk of contamination by foam swabs.
2 Clean the adapter with the foam swab.
3 Dry the inside of the adapter with a clean, dry, foam swab.
4 Blow through the adapter using filtered, dry, compressed air.
Nitrogen gas or compressed dust remover can also be used. Do not shake, tip,
or invert compressed air canisters, because this releases particles in the can
into the air. Refer to instructions provided on the compressed air canister.
Caring for electrical connections
The following list includes the basic principles of microwave connector care.
For more information on microwave connectors and connector care, consult
the Hewlett-Packard Microwave Connector Care Manual, HP part number
08510-90064.
Handling and Storage
• Keep connectors clean
• Extend sleeve or connector nut
• Use plastic endcaps during storage
• Do not touch mating plane surfaces
• Do not set connectors contact-end down
Visual Inspection
• Inspect all connectors carefully before every connection
• Look for metal particles, scratches, and dents
• Do not use damaged connectors
Cleaning
• Try cleaning with compressed air first
• Clean the connector threads
• Do not use abrasives
• Do not get liquid onto the plastic support beads
Cleaning Connections for Accurate Measurements
Reference
4-19