HP 83491A User Manual page 9

1 Verify that all system components ordered have arrived by comparing the
❒ An HP 83491/2/3A Clock Recovery Module
❒ Fiber-optic adapter cable (HP 83492/3A module only)
❒ Two RF adapter cables (HP 83491A module only)
❒ HP 83491/2/3A Clock Recovery Modules User's Guide (this book)
1 Make sure that the serial number listed on the module's rear-panel label
2 Install the HP 83491/2/3A module into the HP 83480A mainframe's left slot.
N O T E
To install the module
shipping forms to the original purchase order. Inspect all shipping containers.
The shipment includes:
If your shipment is damaged or incomplete, save the packing materials and
notify both the shipping carrier and the nearest Hewlett-Packard Sales and
Service office. HP will arrange for repair or replacement of damaged or incom-
plete shipments without waiting for a settlement from the transportation com-
pany. Notify the HP customer engineer of any problems.
matches the serial number listed on the shipping document.
Figure 1-1. Serial number label
Finger-tighten the knurled screw on the front panel of the plug-in module to
ensure that the module is securely seated in the mainframe.
Installing the module into the left slot ensures that the supplied adapter cable
will fit. See Figure 1-2.
Installation
Installation
1-3