Safety Considerations - Daikin RZQ24TAVJU Installation Manual

CONTENTS
1. SAFETY CONSIDERATIONS ..................................................1
2. INTRODUCTION......................................................................2
2-1. Standard operation limit ....................................................3
2-2. Standard supplied accessories .........................................3
3. BEFORE INSTALLATION ........................................................3
4. SELECTING INSTALLATION SITE .........................................3
5. PRECAUTIONS ON INSTALLATION ......................................5
6. REFRIGERANT PIPING ..........................................................6
6-1. Installation tools.................................................................6
6-2. Selecting piping material ...................................................6
6-3. Protection against contamination when installing pipes ....6
6-4. Pipe connection.................................................................6
6-5. Connecting the refrigerant piping ......................................6
6-6. Thermal insulation of piping ..............................................7
6-7. Air tight test and vacuum drying ........................................7
7. ELECTRIC WIRING .................................................................8
7-1. Wiring connection example for whole system ...................8
7-2. How to lay the power supply wiring and
transmission wiring............................................................9
7-3. How to connect the power supply wiring ...........................9
7-4. Transmission wiring connection procedure .....................10
8. ADDITIONAL REFRIGERANT CHARGE...............................10
8-1. Before adding refrigerant.................................................10
8-2. Checking the refrigerant tank ..........................................10
8-3. Adding refrigerant............................................................10
9. POST-WORK CHECKS .........................................................11
10. TEST OPERATION ................................................................11
10-1. Power On-Check Operation .........................................11
10-2. Temperature control operation checklist .......................12
10-3. Final refrigerant charge adjustment...............................12
11. ENERGY SAVING AND OPTIMUM OPERATION.................12
11-1. Three main operation methods are available: ...............13
11-2. Several comfort settings are available ..........................13
11-3. Setting of Heat Pump Lockout and
Emergency Heat Mode..................................................15
12. CAUTION FOR REFRIGERANT LEAKS ...............................17
1.

SAFETY CONSIDERATIONS

Read these "SAFETY CONSIDERATIONS for Installation" carefully before
installing air conditioning equipment. After completing the installation,
make sure that the unit operates properly during the startup operation.
Instruct the customer on how to operate and maintain the unit. Inform
customers that they should store this Installation Manual for future ref-
erence.
Always use a licensed installer or contractor to install this product.
Improper installation can result in water or refrigerant leakage, electrical
shock, fire, or explosion.
Meanings of DANGER, WARNING, CAUTION, and NOTE Symbols:
DANGER.......Indicates an imminently hazardous situation which,
if not avoided, will result in death or serious injury.
WARNING.....Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION ......Indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
It may also be used to alert against unsafe practices.
NOTE ............Indicates situations that may result in equipment or
property damage accidents only.
English
SPLIT SYSTEM Air Conditioners
• Refrigerant gas is heavier than air and replaces oxygen. A mas-
sive leak can lead to oxygen depletion, especially in basements,
and an asphyxiation hazard could occur leading to serious injury
or death.
• Do not ground units to water pipes, gas pipes, telephone wires,
or lightning rods as incomplete grounding can cause a severe
shock hazard resulting in severe injury or death.
Additionally, grounding to gas pipes could cause a gas leak and
potential explosion causing in severe injury or death.
• If refrigerant gas leaks during installation, ventilate the area
immediately. Refrigerant gas may produce toxic gas if it comes
into contact with fire. Exposure to this gas could cause severe
injury or death.
• After completing the installation work, check that the refriger-
ant gas does not leak throughout the system.
• Do not install unit in an area where flammable materials are
present due to risk of explosions that can cause serious injury
or death.
• Safely dispose of all packing and transportation materials in
accordance with federal/state/local laws or ordinances.
Packing materials such as nails and other metal or wood parts,
including plastic packing materials used for transportation may
cause injuries or death by suffocation.
• Only qualified personnel must carry out the installation work.
Installation must be done in accordance with this installation
manual. Improper installation may result in water leakage, elec-
tric shock, or fire.
• When installing the unit in a small room, take measures to keep
the refrigerant concentration from exceeding allowable safety
limits. Excessive refrigerant leaks, in the event of an accident in
a closed ambient space, can lead to oxygen deficiency.
• Use only specified accessories and parts for installation work.
Failure to use specified parts may result in water leakage, elec-
tric shocks, fire, or the unit falling.
• Install the air conditioner or heat pump on a foundation strong
enough that it can withstand the weight of the unit.
A foundation of insufficient strength may result in the unit fall-
ing and causing injuries.
• Take into account strong winds, typhoons, or earthquakes
when installing. Improper installation may result in the unit fall-
ing and causing accidents.
• Make sure that a separate power supply circuit is provided for
this unit and that all electrical work is carried out by qualified
personnel according to local, state and national regulations. An
insufficient power supply capacity or improper electrical con-
struction may lead to electric shocks or fire.
• Make sure that all wiring is secured, that specified wires are
used, and that no external forces act on the terminal connec-
tions or wires. Improper connections or installation may result
in fire.
• Before touching electrical parts, turn off the unit.
• This equipment can be installed with a Ground-Fault Circuit
Interrupter (GFCI). Although this is a recognized measure for
additional protection, with the grounding system in North
America, a dedicated GFCI is not necessary.
DANGER
WARNING
Installation manual
1