Operation - Havso Nikolina 2.0 User Manual

Before initial use
1. Before first use, unpack the appliance and place all parts on a horizontal surface.
2. The jar assembly (including the measure cup, lid, seal ring 1, jar, seal ring 2 ,
blade assembly and jar base) has already been assembled into the motor unit.
Disassemble to wash all detachable parts except the motor unit. Refer to the latter
chapter maintenance.
3. Once all pieces have been cleaned and dry thoroughly, reassemble.
4. Invert the jar onto a level surface, holding the jar handle, put the the seal ring 2
and blade assembly onto the jar base bottom and secure the blade assembly by
turning it anti-clockwise until tight (see fig. 3).
5. Reposition the jar assembly with its opening upwards. Wrap the seal ring 1 around
the lid bottom and put the lid onto the jar assembly. Place the measure cup exactly
into the lid by fitting the small projection on the both sides of the cup into the slots
of the lid and turning the cup clockwise until tight (see fig. 4).
6. Finally, place the assembled jar onto the motor unit by aligning the strip on the
assembled jar bottom (see fig. 5).
Caution: Jar and jar base is now secure. Do not try to twist the jar and jar base
onto motor unit.
Fig 3. Fig 4.

OPERATION

Fig 5.
15