Maintenance - Havso Nikolina 2.0 User Manual

MAINTENANCE

This product contains no user serviceable parts. Refer service to qualified service
personnel.
1. Before cleaning, unplug the blender.
2. Always wash immediately after use for easier cleaning. Don't let food dry on the
jar assembly as this will make cleaning difficult.
3. Pour a little warm soapy water into the jar and turn the knob to P position for a
few seconds. And then empty the jar.
4. Dismantle all detachable parts. Lift the jar assembly off the motor unit. Detach
the blade assembly by turning it clockwise from the jar base bottom, and
remove the seal ring 2 and blade assembly (see fig.8). In addition, detach the
jar cover seal ring 1 from the jar cover.
5. Rinse the measure cup, lid, seal ring 1, jar, seal ring 2 and blade assembly by
hands or in a dishwasher and then dry. They are dishwasher safe components,
but the temperature setting shall not exceed 70 °.
6. Brush the blade clean using warm soapy water, then rinse thoroughly under the
tap. Don't touch the sharp blades, handle carefully. Don't immerse the blade
assembly in water. Leave to dry upside down away from children.
7. Wipe the motor unit with a damp cloth and dry thoroughly. Remove the
stubborn spots by rubbing with non-abrasive cleaner. If liquids spill into
the motor unit; first unplug the unit, then wipe with a damp cloth and dry
thoroughly.
Caution!
1. Do not immerse the motor unit in liquid to prevent the risk of electric shock.
2. Do not use rough scouring pads or cleansers on parts or finish.
3. Do not place any parts of this unit into dishwasher for cleaning.
This unit is not available for dishwasher.
18