Operation - Havso Nikolina 4.0 User Manual

Using your blender
1. Carefully unpack all parts and ensure they are free from damage.
2. The jar assembly (including the measuring cup, lid, sealing ring 1, jar, sealing
ring 2, blade assembly) has already been assembled into the motor unit.
Disassemble to wash all detachable parts except the motor unit. Refer to the
chapter "Maintenance".
3. Once all pieces have been cleaned and dry thoroughly, reassemble.
1) Invert the jar unit onto a level surface, holding the jar handle, put the sealing
ring 2 and blade assembly onto the jar base bottom and secure the blade
assembly by turning it anti-clockwise until tight.
2) Reposition the jar assembly with its opening upwards. Wrap sealing ring
1 around the lid bottom and put the lid onto the jar assembly. Place the
measuring cup exactly into the lid by fitting the small projection on both sides of
the cup into the slots of the lid and turn the cup clockwise until tight.
3) Place the assembled jar onto the motor unit by aligning the strip on the
assembled jar bottom.
Caution: Jar and jar base is now secured. Do not try to twist the jar and jar
base onto motor unit.
4. Place the food to be blended into the jar. Usually, certain amount of liquid
need to be added to facilitate a smooth running of appliance. The proportion
of the food and liquid is 2:3 (two parts of solid food and one part of liquid). The
amount of mixture should not exceed the max level as indicated on the jar.
Note: Peel or core fruit or vegetables and then cut the food into small dices
before blending (approx. 15 x 15 x 15 mm).
Note: Never use boiling liquids or run the appliance empty.
5. Put the lid on the jar. Ensure that the measuring cup is in place.

OPERATION

15