Operation - Havso Nikolina 1.5 User Manual

BEFORE FIRST USE
After unpacking the appliance, wash everything except the motor base by warm,
soapy water. Dry thoroughly. Wipe the motor base with a damp cloth or sponge.
1. CAUTION: DO NOT IMMERSE THE BASE IN WATER. Care should be taken
when handing the blade, as they are very sharp.
2. Put the sealing ring (4) on the inner edge of the blade Cup base (5).
3. Mount the jug (3) onto the blade cup base unit and tune it in clockwise
direction until it is fixed.
4. Put the Lid (2) on the jug (3) and tune it in clockwise direction until it is locked
5. Insert the inner cover (1) into the opening of the lid, and tune it in clockwise
direction until it is locked.
6. Make sure the power plug is unplugged from the power outlet and the blender
is switched off (Switch in the '0' setting). Then mount the jug assembly (8) onto
the motor base unit (7) and tune it in clockwise direction until it is locked.
HOW TO USE BLENDER
1. Ensure that the unit is at the "0" setting, then connect it to a power source.
2. Put the foodstuffs into the jug, and close the lid (2) securely.
3. Switch on the motor block:
Speed setting
Low (1)
High (2)
P
4. After using the blender, always move the switch into the '0' setting and pull out
the mains plug.
5. Tune the jug assembly (8) in anticlockwise direction until it is unlocked. Just lift it
up to remove the jug.
6. It is recommended that, this product should not exceed 3 minute in operation
and allow 1 minute break in between each use. This prevent motor from becoming
too hot and tend to damage the motor.
For light using with liquids.
For more solid consistency – for mixing liquids and solid foodstuffs.
For ice crushing & short, powerful impulse movements
(The switch does not permanently engage in the "P" setting.
You have to hold the switch in the "P" setting or turn it repeatedly
into the "P" setting).

OPERATION

Use
13