Cleaning & Disinfecting The Wet/Dry Vac; Storage - Craftsman 125.12002 Operator's Manual

Maintenance (continued)
Cleaning and Disinfecting the Wet/Dry Vac
To keep your Wet/Dry Vac looking its best,
clean the outside with a cloth dampened
with warm water and mild soap.
To clean the collection tank:
1. Dump debris out.
2. Wash collection tank thoroughly with
warm water and mild soap.
3. Wipe out with dry cloth.
Before prolonged storage or as needed
(i.e. after waste water pick up) the
collection tank should be disinfected.

Storage

Before storing your vac, the collection tank
should be emptied and cleaned. The hose
should be wrapped with the storage racks.
The cord and accessories should be stored
as illustrated on the right (Fig. 1-3)
so they can be readily available when
needed. Store vac indoors.
To disinfect the collection tank:
1. Pour 1 gallon of water and 1 teaspoon
chlorine bleach into the collection tank.
2. Let solution stand for 20 minutes,
carefully swishing every few minutes,
making sure to wet all inside surfaces
of the collection tank.
3. Empty drum after 20 minutes. Rinse
with water until bleach smell is gone.
Allow drum to dry completely before
sealing the motor on the collection tank.
1
3
12
2