Craftsman 125.12002 Operator's Manual page 7

10. Insert the handle into the slots
located on the top of the power
head and secure it with the screws
provided. Do not over tighten the
screw. (Fig. 12)
11. Position the hose storage rack
as illustrated. insert one side of the
rack into the channel making sure
it is secured in place. Squeeze in
the other end and insert it into the
corresponding channel making sure
it is secured. (Fig. 13 & Fig. 14)
12. Hang the tool caddy to the hooks
on the rear of the vacuum. (Fig. 15)
13. Secure the large end of the hose
onto the vacuum port on the
collection tank and screw into
place. (Fig. 16)
14. Choose the desired accessories
and extension wands and push
onto the hose. (Fig. 17)
7