Change Username And Password - Buffalo BS-GS20 Series User Manual

Chapter 1 Initial Settings

Change Username and Password

To change the default username and password from "admin" and "password", refer to the following procedure.
1
Open Settings.
2
Navigate to [Basic] - [System Security] - [Administration Account].
3
Enter your new username and password (also fill the "Confirm" field), then click [Apply].
Notes:
• For the new username, you may enter up to 8 alphanumeric characters, hyphens (-), and underscores (_).
• For the new password, you may enter up to 32 alphanumeric characters, hyphens (-), and underscores (_).
4
Enter the new username and password, then click [Log In].
11