BERG BENOMIC STAR 300 Technical Handbook page 8

Increasing the lifting height in any way whatsoever is strictly forbidden.
- Always remain standing on the work platform
Keep a safe distance from fixed and/or moving parts within the greenhouse as well as
-
cables and ropes.
- It is prohibited to pull steel cables or lay screens using the BENOMIC STAR.
- It is forbidden to use the BENOMIC STAR as a crane.
It is forbidden for either people or animals to enter the path on which the BENOMIC
-
STAR is being operated. Never operate more than one pipe rail wagon on the same
path!
- When using the BENOMIC STAR all the protective screens and covers and caps must
be fitted and secured.
- Additional options, accessories and spares must be ordered and supplied exclusively
by the manufacturer, Berg Hortimotive.
Warning!
- Operating the BENOMIC STAR may only take place when there are no other persons in
the vicinity (apart from the operator) of the machine.
- The BENOMIC STAR may only be operated by persons of 18 years or older who have
received thorough instruction about the BENOMIC STAR, who are fully familiar with this
instruction handbook and are completely aware of the dangers associated with
operating the machine.
The BENOMIC STAR may only be operated once it has been correctly installed on the
-
pipe rail system.
All personnel working in the area of the BENOMIC STAR should be made familiar with
-
relevant safety rules and precautions that apply to the pipe rail system.
- Instructions from the employer.
- Repairs to the BENOMIC STAR may only be carried out by personnel who have
received specific training from Berg Hortimotive.
When carrying out maintenance on the scissor mechanism, the scissor blocks must
-
always be put in place before starting (see 9.4).
- Never carry out repairs to the BENOMIC STAR if it is already being operated by
someone else. Always switch it off via the main switch before carrying maintenance
activities and remove the charging plug from the wagon.
Check the BENOMIC STAR daily for defects and carry out maintenance frequently - see
-
chapter 9: maintenance.
- Keep the operating controls and safety pictograms clean.
- operating controls and safety pictograms should always be clearly visible.
- Once you have finished working with the BENOMIC STAR always turn off the
main switch.
- Never leave the BENOMIC STAR unattended.
- Only when you have removed the key from the main switch.
Translated user manual BENOMIC STAR
 8
39
/