Table of Contents
Advertisement
Note
Check the amount of chargers that can be connected to one group. This can be calculated
by multiplying the amperage by the voltage. E.g.: 16A*230V =3680W
Now check the output of the battery charger. Divide this total amount by the output of the
battery charger. E.g.: 3680/700=5.25. In this case 5 battery chargers can be connected.
Also check whether the voltage at the charging location corresponds with the required
voltage stated on the battery charger. Long cables can lead to voltage drop. If this is the case
please consult your dealer.
Check whether it is a suitable charger for your machine. The battery specifications suitable
for the charger are stated on the charger itself or in the charger handbook!
Only use chargers suitable for charging 24V-110Ah/5h wet batteries! (see charger
instructions)
Substance Batteries wet, filled with acid, electric storage
UN Number 27
HIN 80
ADR Label 8
ADR Class 8
Packing group -
Emergency Response Information
CORROSIVE SUBSTANCE
1. Characteristics
• Corrosive, causing damage to skin, eyes and air passages
• Not flammable
2. Hazards
• Heating of container(s) will cause pressure rise with risk of bursting and subsequent
explosion (BLEVE).
• Gives off corrosive and irritant fumes, also when burning
• May attack metals and produce hydrogen gas which may form explosive mixture with air
• The vapour may be invisible and is heavier than air. It spreads along the ground and may
enter sewers and basements
3. Personal protection
• Chemical protection suit.
• Respiratory mask equipped with ABEKP1 filter
4. Intervention actions
4.1 General
• Keep upwind. Put on protective equipment before entering danger area.
36
39
Translated user manual
BENOMIC STAR
/
Advertisement
Table of Contents
