b
base cover
8
Follow the procedure in
Coin Cell
Removing the coin cell
1
Follow the procedure in
2
Remove the:
a
micro-SD card
b
base cover
c
battery
3
Disconnect the battery cable from its connector on the system board [1].
4
Lift and remove the coin cell from the system [2].
NOTE:
A strong adhesive is used on the coin cell; a bit of force is needed to peel up the battery from the palmrest.
Installing the coin cell
1
Place the coin cell battery into the system.
2
Connect the coin cell battery cable to the connector on the system board.
68
Disassembly and reassembly
After working inside your
computer.
Before working inside your
computer.