Turning Off Your Computer; Turning Off Your Computertablet Tablet- Windows - Dell Latitude 3300 Owner's Manual

Command Line Interface
This chapter provides a general overview of the Command Line Interface (CLI) utility. It explains how to run the commands and the syntax
details of the command line options used to configure BIOS settings for the client systems.
Running Command | Configure Commands
You can run the Command | Configure commands in two ways:
• Using Command Prompt
• Using Bootable Image
Command Prompt
To run Command | Configure commands:
1 Click Start → All Program → Dell → Command Configure → Command Configure Command Prompt.
NOTE: If you are using Microsoft Windows Vista operating system or later, right-click Command | Configure Command
Prompt and select Run as administrator.
2 Navigate to the x86 or x86_64 directory depending on the architecture of the operating system.
3 Run the Command | Configure commands.
Bootable Image
To run Command | Configure commands:
1 Copy Dell Command | Configure with the International Organization for Standardization (ISO) image to a Compact disc (CD). For
more information, see Dell Command | Configure Installation Guide available at
2 Boot the system that you want to configure from the CD.
3 Navigate to the Command Configure\x86 or Command Configure\x86_64 directory.
4 Run the Command | Configure commands.

Turning off your computer

Turning off your computertablet tablet— Windows
CAUTION: To avoid losing data, save and close all open files and exit all open programs before you turn off your computer or
remove the side cover.
1 Click or tap .
2 Click or tap and then click or tap Shut down.
NOTE: Ensure that the computer and all attached devices are turned off. If your computer and attached devices did not
automatically turn off when you shut down your operating system, press and hold the power button for about 6 seconds
to turn them off.
50 Technology and components
https://Dell.com/Command .