Component
•
I/O Board to palmrest
•
System board to Palmrest
•
Mis trigger Bkt to SSD
Base cover to Palmrest
Recommended tools
The procedures in this document require the following tools:
•
Phillips #0 screwdriver
•
Phillips #1 screwdriver
•
Plastic scribe
NOTE:
The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4.
microSD card
Installing the microSD card
Slide the microSD card into its slot until it clicks into place.
Removing the microSD card
1
Press in on the microSD card to release it from the computer.
2
Remove the microSD card from the computer.
Base Cover
Removing the base cover
1
Follow the procedure in
2
Remove the:
a
micro-SD card
Quantity
•
1
•
1
10
Before working inside your
Screw type
M2.5*8.0
computer.
Image
Captive screws (Part of the base
cover)
Disassembly and reassembly
59