Electrical Safety - Tunturi T10 User Manual

English
- Only use the equipment in environments
with ambient temperatures between 10
°C and 35 °C. Only store the equipment in
environments with ambient temperatures
between 5 °C and 45 °C.
- Do not use or store the equipment in humid
surroundings. The air humidity must never be
more than 80%.
- Only use the equipment for its intended
purpose. Do not use the equipment for other
purposes than described in the manual.
- Do not use the equipment if any part is
damaged or defective. If a part is damaged
or defective, contact your dealer.
- Keep your hands, feet and other body parts
away from the moving parts.
- Keep your hair away from the moving parts.
- Wear appropriate clothing and shoes.
- Keep clothing, jewelry and other objects
away from the moving parts.
- Make sure that only one person uses the
equipment at a time. The equipment must
not be used by persons weighing more than
135 kg (300 lbs).
- Do not open equipment without consulting
your dealer.

Electrical safety

(Only for equipment with electric power)
- Before use, always check that the mains
voltage is the same as the voltage on the
rating plate of the equipment.
- Do not use an extension cable.
- Keep the mains cable away from heat, oil and
sharp edges.
- Do not alter or modify the mains cable or the
mains plug.
- Do not use the equipment if the mains cable
or the mains plug is damaged or defective.
If the mains cable or the mains plug is
damaged or defective, contact your dealer.
- Always fully unwind the mains cable.
- Do not run the mains cable underneath the
equipment. Do not run the mains cable
underneath a carpet. Do not place any
objects on the mains cable.
- Make sure that the mains cable does not
hang over the edge of a table.
- Make sure that the mains cable cannot be
caught accidentally or tripped over.
- Do not leave the equipment unattended
when the mains plug is inserted into the wall
socket.
- Do not pull the mains cable to remove the
mains plug from the wall socket.
- Remove the mains plug from the wall socket
when the equipment is not in use, before
assembly or disassembly and before cleaning
and maintenance.
CAUTION
• If voltage varies by ten percent (10%) or
more, the performance of your treadmill
may be affected. Such conditions are
not covered under your warranty. If
you suspect the voltage is low, contact
your local power company or a licensed
electrician for proper testing.
CAUTION
• NEVER use a RCD - Residual Current
Device (U.S. ver.= GFCI) - wall outlet with
this treadmill. As with any appliance with a
large motor, the RCD/GFCI will trip often.
Route the power mains cord away from
any moving part of the treadmill including
the elevation mechanism and transport
wheels.
Grounding Instructions
This product must be grounded. If the
treadmill's electrical system should malfunction
or breakdown grounding provides a path of
least resistance for electric current, reducing the
risk of electric shock. This product is equipped
with a cord having an equipment-grounding
plug. The plug must be plugged into an
appropriate outlet that is properly installed and
grounded in accordance with all local codes
and ordinances.
WARNING
• Improper connection of the equipment-
grounding conductor can result in a risk
of electric shock. Check with a qualified
electrician or serviceman if you are in
doubt as to whether the product is
properly grounded. Do not modify the
plug provided with the product if it will
not fit the outlet; have a proper outlet
installed by a qualified electrician.
16