Turning Off The Bluetooth Audio; Adjusting The Volume Of The Radio From Bluetooth Audio Device; Clearing All Bluetooth Devices Information - Motorola APX 8000XE 1 User Manual

administrator for more information on the
programming of this feature.
NOTICE:
For BT PTT press, the active microphone can
be configured in CPS to transmit from either
the RSM, the radio microphone, or the BT
headset. If the configured device is not
available, audio transmission reverts to BT
headset.

Turning Off the Bluetooth Audio

• Turning off the Bluetooth audio using the
preprogrammed button:
a. Press the preprogrammed Bluetooth Audio
Reroute button to route the audio from the
headset to the radio.
You hear a short, medium-pitched tone. The
display shows SPKR ON.
Adjusting the Volume of the Radio from
Bluetooth Audio Device
Ensure that the Bluetooth audio device is connected to the
radio.
Your radio can only control the volume of MCW and OCW
Bluetooth enabled audio device. If the radio is paired with
other Bluetooth enabled audio device, its volume is
independent from the APX radio. In this case, the volume is
only adjustable on the device.
Adjust volume up/down on the Bluetooth audio
device.
The radio display shows VOL XX and sounds a short,
medium-pitched tone.
Clearing All Bluetooth Devices
Information
• Clearing all Bluetooth devices information using the
preprogrammed Bluetooth On/Off button:
English
91