Radio Shack PRO-95 Owner's Manual page 83

4'5'66+0)1
+0+6+#.+<+0)"6*'"
5%#00'4
If the scanner's display locks up or
does not work properly after you
connect a power source, you
might need to reset or initialize it.
4
'5'66+0)
1. Turn off the scanner, then turn
it on again.
2. Insert a pointed object, such
as a straightened paper clip,
into the reset opening on the
side of the scanner. Then
gently press and release the
reset button inside the
opening.
Pressing the reset button does not
clear the scanner's memory.
+
0+6+#.+<+0)
5
%#00'4
1. Turn off the scanner, then turn
it on again.
Jhkda_d] Jhkda_d]
Jhkda_d] Jhkda_d]
2. Press then
0
Jeý:kWbýJhkda_d] Jeý:kWbýJhkda_d]
Jeý:kWbýJhkda_d] Jeý:kWbýJhkda_d]
?d_j_Wb_p_d]ýFb[Wi[ýMW_j$ ?d_j_Wb_p_d]ýFb[Wi[ýMW_j$
?d_j_Wb_p_d]ýFb[Wi[ýMW_j$ ?d_j_Wb_p_d]ýFb[Wi[ýMW_j$
for about 2 seconds.
Do not turn off the scanner until
the initialization is complete. When
the initialization is complete
appears on the top line of the
8Wdaý&ý9^ý&& 8Wdaý&ý9^ý&&
8Wdaý&ý9^ý&& 8Wdaý&ý9^ý&&
display.
the bottom line.
" "5
6*' %#00'4
" "
6*'
M[bYec[ýJeý:kWbý M[bYec[ýJeý:kWbý
M[bYec[ýJeý:kWbý M[bYec[ýJeý:kWbý
#
appears.
M[bYec[ý M[bYec[ý
M[bYec[ý M[bYec[ý
while
1
appears.
appears on
• If you have
#
• You can save the
• This procedure
appears
C&&& C&&&
C&&& C&&&
#
"+/2146#06
problems with the
scanner, first try
to reset it to retain
all memory. If that
does not work,
you can initialize
the scanner.
information in
your scanner's
memory into your
computer or
another scanner
before trying to
initialize it. See
"Transferring
Data to and from
Another Scanner
or a PC" on
Page 15.
clears all
information you
stored in the
scanner's
memory. Initialize
the scanner only
when you are
sure the scanner
is not working
properly.
" #
83