Table of Contents
Advertisement
R
"9#40+0)"
Never install non-
rechargeable
batteries in the
rechargeable yellow
battery holder. Non-
rechargeable
batteries can get hot
or explode if you try
to recharge them.
.
"%#76+10"
• The battery holder
fits only one way.
Do not force it.
• Use only fresh
batteries of the
required size and
recommended
type.
• Always remove
old or weak
batteries.
Batteries can leak
chemicals that
destroy electronic
circuits.
• Do not mix old
and new
batteries, different
types of batteries
(alkaline or
rechargeable), or
rechargeable
batteries of
different
capacities.
• If you do not plan
to use the
scanner with
batteries for a
month or longer,
remove the
batteries.
Batteries can leak
chemicals that
can destroy
electronic parts.
10
R
You must charge rechargeable
"
batteries before you use them the
first time. See "Charging
Rechargeable Batteries" on
Page 11.
Follow these steps to install the
batteries:
1. Press in on the battery
compartment cover on the
.
back of the scanner and slide
"
the cover down to remove it.
2. Pull the battery holder out of
the battery compartment.
3. If you are using non-
rechargeable batteries , place
them into the black holder, as
indicated by the polarity
symbols (
the holder.
If you are using rechargeable
batteries , place them into the
yellow holder as indicated by
the polarity symbols (
marked on the holder.
4. Place the battery holder into
the battery compartment.
5. Replace the cover.
When battery power is low,
8Wjj[hoé
8Wjj[hoé
8Wjj[hoé
8Wjj[hoé
beeps continuously. When battery
power is depleted, the scanner
turns itself off. Replace all four
non-rechargeable batteries, or
recharge the rechargeable
batteries. See "Charging
Rechargeable Batteries" on
Page 11.
Rý
.
and
+
–
appears and the scanner
Rý
.
) marked on
and
)
+
–
Bemý
Bemý
Bemý
Bemý
Hide quick links:
Advertisement
Table of Contents
