Radio Shack PRO-95 Owner's Manual page 52

52
lit areas. Press
backlight for 5 seconds. To turn off
the backlight before it automatic-
ally turns off, press
To turn on the backlight so it does
not turn off automatically, hold
down for about 1 second.
Press while the backlight is on
to turn it off.
You can select the amount of time
the light stays on. Follow these
steps to change the illuminated
time:
1. If the scanner is on, turn it off
and back on again.
:kWbýJhkda_d]ý :kWbýJhkda_d]ý
:kWbýJhkda_d]ý :kWbýJhkda_d]ý
M[bYec[ýjeý:kWbýJhkda_d]ý M[bYec[ýjeý:kWbýJhkda_d]ý
M[bYec[ýjeý:kWbýJhkda_d]ý M[bYec[ýjeý:kWbýJhkda_d]ý
2. While
appears, press
Ki[ýKf%:emdýa[oiýjeýi[jýB_jýe\\ý Ki[ýKf%:emdýa[oiýjeýi[jýB_jýe\\ý Ki[ýKf%:emdýa[oiýjeýi[jýB_jýe\\ý Ki[ýKf%:emdýa[oiýjeýi[jýB_jýe\\ý
3.
j_c[ý+ýi[YedZi j_c[ý+ýi[YedZi j_c[ý+ýi[YedZi j_c[ý+ýi[YedZi
8 8 8 8
4. Press
'& '& '& '& (& (& (& (&ý ý ý ý i[YedZi i[YedZi
i[YedZi i[YedZi
or
.
ENTER
7 "
5+0) 6*'
Once you program your scanner,
you can protect it from accidental
program changes by turning on
the key lock feature. When the
keypad is locked, the only controls
that operate are
, and
SQUELCH
You cannot activate the key lock
while you are entering a frequency
into a channel.
To turn on the key lock, press
then
FUNC
appears for about 1 second.
to turn on the
again.
M[bYec[ýjeý M[bYec[ýjeý
M[bYec[ýjeý M[bYec[ýjeý
appears.
.
appears
9 9 9 9
or to select
then press
"-
';.1%-
, /
FUNC
.
VOLUME
A[oýbeYa[Z$ A[oýbeYa[Z$
A[oýbeYa[Z$ A[oýbeYa[Z$
/ .
) ) ) ) + + + +
, ,
,
A[oý A[oý
A[oý A[oý