Radio Shack PRO-95 Owner's Manual page 49

2. Select the weather channel
you want to program as the
priority channel.
3. Press
FUNC
9^Wdd[b 9^Wdd[b
9^Wdd[b 9^Wdd[b
flashes on the bottom
line two times.
To turn on the priority feature,
press so
PRI
line while scanning.
FH?mný FH?mný
FH?mný FH?mný
if you set the priority to a
weather frequency) appears on
the bottom line. If the scanner
detects activity on the priority
Fh_ý9^Wdd[b Fh_ý9^Wdd[b
Fh_ý9^Wdd[b Fh_ý9^Wdd[b
channel,
the scanner detects a weather
alert tone in Priority WX mode,
9^Wdd[b 9^Wdd[b
9^Wdd[b 9^Wdd[b
appears for 3 seconds
then changes to
the scanner sounds an alert tone
(see "Displaying Weather
Messages" on Page 40).
To turn off the priority feature,
press .
PRI
%
*#0)+0)
/
1&'
The scanner is preset to the most
common AM or FM receive mode
for each frequency range. The
preset mode is correct in most
cases. However, some amateur
radio transmissions and trunked
systems do not operate in the
preset mode. If you try to listen to
a transmission when the scanner
is not set to the correct receive
mode, the transmission might
sound weak or distorted.
If you want to listen to trunking
transmissions in closed mode, you
then .
PRI
F F F F
appears on the top
FH?ed FH?ed
FH?ed FH?ed
(or
appears. Or if
M[Wj^[hý7B;HJ M[Wj^[hý7B;HJ
M[Wj^[hý7B;HJ M[Wj^[hý7B;HJ
±
" "4
6*' '%'+8'
Fh_ý Fh_ý
Fh_ý Fh_ý
Fh_ý Fh_ý
Fh_ý Fh_ý
and
• Priority WX is only
• When the scanner
"
• If you program a
± ±
"016'"
for receiving a
weather alert.
detects a 1050 Hz
alert tone, priority
WX activates and
you receive a
weather alert.
weather frequency
into the priority
channel and the
scanner detects a
weather alert tone
on that frequency,
the scanner
sounds the alert
tone.
"
49