Table of Contents
Advertisement
%JCTIKPI"4GEJCTIGCDNG"
$CVVGTKGU
Your scanner has a built-in
charging circuit that lets you
charge nickel-metal hydride (Ni-
MH) or nickel cadmium (Ni-CD)
rechargeable batteries (not
supplied) while they are in the
scanner. To charge rechargeable
batteries, connect an appropriate
AC or DC adapter to the
jack. For best results we
9V
recommend RadioShack
rechargeable nickel-metal hydride
(NiMH) 1500mAh batteries.
To charge batteries with a DC
adapter from a DC power source,
you must use a 9V, 300 mA DC
adapter and a size C
Adaptaplug™ (neither supplied).
Both are available at your local
RadioShack store. Make sure the
adapter's voltage is set to 9V.
It takes about 16 hours to
recharge fully discharged
1600mAh NiMH rechargeable
batteries. You can operate the
scanner while recharging the
rechargeable batteries, but
charging takes longer.
7
"#%"2
5+0)
You can power the scanner using
a 9V, 300 mA AC adapter and a
size C Adaptaplug (neither
supplied). Both are available at
your local RadioShack store.
PWR DC
19'4
R
"9#40+0)"
Always dispose of
old batteries
promptly and
properly. Do not bury
or burn them.
.
"%#76+10"
If you do not plan to
use the scanner with
batteries for a month
or longer, remove the
batteries. Batteries
can leak chemicals
that can destroy
electronic parts.
±
• The scanner can
also charge Ni-Cd
batteries. 600mAh
batteries require 6
hours and
850mAh batteries
±
require 8 hours to
charge.
• When you charge
Ni-Cd batteries,
do not overcharge
them. Overchar-
ging shortens
battery life.
• Rechargeable
batteries last
longer and deliver
more power if you
let them fully
discharge once a
month. To do this,
use the scanner
until
appears. Then
fully charge the
rechargeable
batteries.
R
"
.
"
±
"016'"
"
Bemý8Wjj[hoé
Bemý8Wjj[hoé
Bemý8Wjj[hoé
Bemý8Wjj[hoé
11
Hide quick links:
Advertisement
Table of Contents
