Routine Care And Maintenance; Storage; Cleaning - InMotion P1 Series User Manual

5

5.1. Storage


Please keep the E-Bike out of direct sun (even if is inside the car), because after some time, the temperature of the
battery could reach 50ºC, decreasing the function and shortening the lifespan of the battery.

Please do not place the E-Bike under moisture conditions.

The E-Bike will be automatically discharged when it is not in use. The battery power should be checked at least once
per month and should be timely charged until it is full. Please do not leave it charging for longer time, as this could
case damages.

In winter, the battery will lose power faster due to the low temperature.

Bad storage can lead to the life loss of the battery of the E-Bike or other risks. Therefore, please keep the Inmotion E-
Bike indoors in a dry place with right conditions. If the E-Bike is not used for a long time, please fully charge it and
charge it at least once every month.

5.2. Cleaning


Before cleaning, please make sure the E-Bike is powered off, pull out the cable and close the charging port. When
cleaning, please avoid water pouring into the charging port.

Use soapy water or clean water to wipe the shell of Inmotion E-Bike with soft cloth. Please do not sue high pressure
water gun to wash it.

Water and dust proof grade of Inmotion E-Bike P1 is IP54, which means it is resistant against spilling and also dust
proof. Therefore, please do not soak the Inmotion E-Bike into the water, as it will lead to permanent damages.

Routine Care and Maintenance

43