Belkin Wireless G Travel Router F5D7233 User Manual page 78

Troubleshooting Troubleshooting
2.
Open your wireless utility software by clicking on the icon in the
system tray at the bottom, right-hand corner of the screen. If you
are also using a Belkin Wireless Card or Adapter with this Router,
the tray icon should look like this (the icon may be red or green):
3.
The exact window that opens will vary depending on the model
of wireless card you have; however, any of the utilities should
have a list of "Available Networks"—those wireless networks it
can connect to.
Does the name of your wireless network appear in the results?
Yes, my network name is listed—go to the troubleshooting
solution titled "I can't connect to the Internet wirelessly, but my
network name is listed".
No, my network name is not listed—go to the troubleshooting
solution titled "I can't connect to the Internet wirelessly, and my
network name is not listed".
Problem:
I can't connect to the Internet wirelessly, but my network name
is listed.
Solution:
If the name of your network is listed in the "Available Networks" list,
please follow the steps below to connect wirelessly:
1.
Click on the correct network name in the "Available Networks" list.
2.
If the network has security (encryption) enabled, you will need to
enter the network key. For more information regarding security,
see the section entitled "Securing your Wi-Fi Network" in this
User Manual.
3.
Within a few seconds, the tray icon in the lower, left-hand
corner of your screen should turn green, indicating a successful
connection to the network.
76