Belkin Wireless G Travel Router F5D7233 User Manual page 19

Connecting and Configuring your Router
3. Configure . Configure Configuration for Adapter Mode
2.2
Check to make sure that the
Ethernet and Power LEDs on the
front of the Router are on. Click
"Next" to go to the Router's home
page on the Web.
3.1
Wirelessly connect to a network
from the "Available Networks"
window. Select a network by
clicking "Join" and then "Connect".
The status window will tell you
the current status of the network
to which the Router is currently
connected. Click "Next".
Note:
If you do not see the page
pictured here once you have
established a connection with the
Router Router, p Router, p lease refer to the "Using
the Adapter Mode" section in this
manual on page 67.
3.2
Your installation is now complete.
However, if you would like to set
up any advanced features (such as
security features), you may click the
"Advanced Features" button or type
"192.168.2.225" into the navigation
bar of your web browser.
17
1
2
3
4
5
6
7
8
9
10
11