Belkin Wireless G Travel Router F5D7233 User Manual page 74

Using the Adapter Mode Using the Adapter Mode Using the Adapter Mode Troubleshooting Troubleshooting
Restart Client
You can restart your Router (in Adapter Mode) without losing any of
your configuration settings by clicking "Restart Client".
Restore Factory Defaults
Clicking "Restore Factory Default" will erase all your current settings.
Save Backup Settings
You can save your current configuration by using this feature. Saving
your configuration will allow you to restore it later if your settings are
lost or changed. It is recommended that you back up your current
configuration before performing a firmware update.
Restore Previous Settings
This option will allow you to restore a previously saved configuration.
Firmware Update
From time to time, Belkin may release new versions of the Router's
firmware. Updates contain improvements and fixes to known
problems. For the latest firmware, go to the support section of
www.belkin.com/networking.
a. Browse:
Clicking on "Browse" will open a window that allows you to
select the location of the firmware-update file.
b. Upgrade:
Clicking on "Upgrade" will update your Router to the
latest firmware.
72 72 72